Step 18

Place the link part

On the EdgeBar  tool, click the Parts Library tab.

In the file list area on the Parts Library tab, select the file named

link.par, hold down the left  mouse button, drag the file into the

assembly window, and then release the mouse button.

Step 19

Align the  link part and support part

On the Place Part SmartStep ribbon bar, in the relation type list,

click the relationship Types list, click the Axial Align button.

Step 20

Select the Axis to Align

In the Place part window, select any hole of the link part.

Step 21

Select the part to which the axis will be aligned

In the assembly window, select the support part.

Step 22

Select the aligning axis on the body part

In the Assembly window, select the right hole of the support part.

Step 23

Finishing aligning the link

On the Place SmartStep ribbon bar, click OK

Mate the link part to the  support part

On the Place Part SmartStep ribbon bar, in the Relationship

Type list, click the Mate button.

Step 25

Use QuickPick to Select the planar face on the  link

 Position the mouse cursor over the the edge of link and wait it change to

, and click.

and  the QuickPick tool is displayed. Move the cursor over the different boxes

on QuickPick. Use QuickPick to highlight the planar face on the link shown in the illustration,

and click to select it.

Step 26

Select the support part to mate in the assembly

In the assembly window, select the support part.

Step 27

Selecting the mating face of the support part

Use QuickPick to select the right face of support part, as shown in the illustration.

Step 28

Finish the Mate command

On the Place Part SmartStep ribbon bar, click OK