Step 51

Mate 6 bar slider to 6 bar base

On the Place Part SmartStep ribbon bar, in the Relationship Type list, click the Mate button.

Step 52

Use QuickPick to select the planar face on 6 bar slider

 Position the mouse cursor over the edge of 6 bar slider and wait it change to , and click.

and  the QuickPick tool is displayed. Move the cursor over the different boxes on QuickPick. Use QuickPick to highlight the planar face on the edges of 6 bar slider shown in the illustration, and click to select it.

Step 53

Select 6 bar base to mate in the assembly

In the assembly window, select 6 bar base.

Step 54

Selecting the mating face of 6 bar base

Use QuickPick to select the inside face of 6 bar base, as shown in the illustration.

Step 55

Finish the Mate command

On the Place Part SmartStep ribbon bar, click OK

Step 56

Mate 6 bar slier to 6 bar base

On the Place Part SmartStep ribbon bar, in the Relationship Type list, click the Mate button.

Step 57

Use QuickPick to select the planar face on 6 bar slider 

 Position the mouse cursor over the edge of 6 bar slider and wait it change to , and click.

and  the QuickPick tool is displayed. Move the cursor over the different boxes on QuickPick. Use QuickPick to highlight the planar face on the bottom side of 6 bar slider shown in the illustration, and click to select it.

Step 58

Select 6 bar base to mate in the assembly

In the assembly window, select 6 bar base.

Step 59

Selecting the mating face of 6 bar base

Use QuickPick to select the inside bottom face of 6 bar base, as shown in the illustration.

Step 60

Finish the mate command

On the Place Part SmartStep ribbon bar, click OK