Step 61
Place 6 bar 650mm
On the EdgeBar tool, click the Parts Library tab. In the file list area on the Parts Library tab, select the file named 6 bar 650mm.par, hold down the left mouse button, drag the file into the
assembly window, and then release the mouse button
Align 6 bar 650mm and 6 bar slider
On the Place Part SmartStep ribbon bar, in the relation type list, click the relationship Types list, click the Axial Align button
Step 63
Select the Axis to Align
In the Place part window, select either hole of 6 bar 650mm.
Step 64
Select 6 bar slider to align in the assembly
In the assembly window, select 6 bar slider.
Step 65
Select the aligning axis on 6 bar slider
In the Assembly window, select the only hole of 6 bar slider.
Step 66
Finish aligning 6 bar 650mm
On the Place Part SmartStep ribbon bar, click OK
Step 67
Mate 6 bar 650mm to 6 bar slider
On the Place Part SmartStep ribbon bar, in the Relationship Type list, click the Mate button.
Step 68
Use QuickPick to select the planar face on 6 bar 650mm
Position
the mouse cursor over the edge of 6 bar slider and wait it change to 
, and
click.
and the
QuickPick tool is displayed. Move the cursor over the different boxes on
QuickPick. Use QuickPick to highlight the planar face on the front side of 6 bar
slider shown in the illustration, and click to select it.
Step 69
Select 6 bar slider triangle to mate in the assembly
In the assembly window, select 6 bar slider.
Step 70
Selecting the mating face of 6 bar slider
Use QuickPick to select the back face of 6 bar slider, as shown in the illustration.