Step 35
On the EdgeBar tool, click the Parts Library tab.
In the file list area on the Parts Library tab, select the file named
Link3.par, hold down the left mouse button, drag the file into the
assembly window, and then release the mouse button.
Step 36
On the Place Part SmartStep ribbon bar, in the relation type list,
click the relationship Types list, click the Axial Align button.
Step 37
Select the Axis to Align
In the Place part window, select the hole which is at the end of link3 part.
Step 38
In the assembly window, select the link2 part.
Step 39
Select the aligning axis on the link2 part
In the Assembly window, select the hole of the link2 part.
Step 40
On the Place SmartStep ribbon bar, click OK
Step 41
On
the Place Part SmartStep ribbon bar, in the Relationship
Type list, click the Mate button.
Step 42
Click on the left face of link3.
Step 43
Select the link2 part to mate in the assembly
In the assembly window, select the link2.
Step 44
Selecting the mating face of the link2 part
Use QuickPick to select the right face of link2 part, as shown in the illustration.
Step 45
On
the Place Part SmartStep ribbon bar, click OK
Step 46
On the Place Part SmartStep ribbon bar, in the relation type list,
click the relationship Types list, click the Axial Align button.
Step 47
Select the Axis to Align
In the Place part window, select the hole which is at the end of link3 part.
Step 48
In the assembly window, select the link4 part.
Step 49
Select the aligning axis on the link4 part
In the Assembly window, select the hole of the link4 part.
Step 50
On the Place SmartStep ribbon bar, click OK
Previous | Next |