Step 18
On the EdgeBar tool, click the Parts Library tab.
In the file list area on the Parts Library tab, select the file named
Link4.par, hold down the left mouse button, drag the file into the
assembly window, and then release the mouse button.
Step 19
On the Place Part SmartStep ribbon bar, in the relation type list,
click the relationship Types list, click the Axial Align button.
Step 20
Select the Axis to Align
In the Place part window, select upper hole of the link1 part.
Step 21
In the assembly window, select the link1 part.
Step 22
Select the aligning axis on the link1 part
In the Assembly window, select the upper hole of the link1 part.
Step 23
On the Place SmartStep ribbon bar, click OK
Step 24
On
the Place Part SmartStep ribbon bar, in the Relationship
Type list, click the Mate button.
Step 25
Position
the mouse cursor over the the edge of link4 and wait it change to
, and
click.
and the
QuickPick tool is displayed. Move the cursor over the different boxes
on QuickPick. Use QuickPick to highlight the planar face on the cylinder shown in the illustration,
and click to select it.
Step 26
Select the link1 part to mate in the assembly
In the assembly window, select the link1.
Step 27
Selecting the mating face of the link1 part
Use QuickPick to select the right face of link1 part, as shown in the illustration.
Step 28
On
the Place Part SmartStep ribbon bar, click OK
Step 29
Click on Move Part Button and then click on Rotate Button
Step 30
Click on the link4 part.
Step 31
Click on the axis to rotate and move cursor with holding left mouse button
Step 32
Click on Move Part Button and then click on Rotate Button
Step 33
Click on the link2 part.
Step 34
Click on the axis to rotate and move cursor with holding left mouse button
Previous | Next |