Step 21
Select 6 bar rotor to align in the assembly
In the assembly window, select 6 bar rotor.
Step 22
Select the aligning axis on 6 bar rotor
In the Assembly window, select the cylinder protrusion that is off center of 6 bar rotor.
Step 23
Finish aligning 6 bar 400mm
On the Place Part SmartStep ribbon bar, click OK
Step 24
Mate rotor to 6 bar 400mm
On the Place Part SmartStep ribbon bar, in the Relationship type list, click the Mate button.
Step 25
Use QuickPick to select the planar face on 6 bar 400mm
Position
the mouse cursor over the edge of 6 bar 400mm and wait it change to 
, and
click.
and the
QuickPick tool is displayed. Move the cursor over the different boxes on
QuickPick. Use QuickPick to highlight the planar face on the backside of 6 bar
400mm shown in the illustration, and click to select it.
Step 26
Select 6 bar rotor to mate in the assembly
In the assembly window, select 6 bar rotor.
Step 27
Selecting the mating face of 6 bar rotor
Use QuickPick to select the front face of 6 bar rotor, as shown in the illustration.
Step 28
Finish the Mate command
On the Place Part SmartStep ribbon bar, click OK
Step 29
Place 6 bar angle
On the EdgeBar tool, click the Parts Library tab. In the file list area on the Parts Library tab, select the file named 6 bar angle.par, hold down the left mouse button, drag the file into the
assembly window, and then release the mouse button
Align 6 bar angle and 6 bar base
On the Place Part SmartStep ribbon bar, in the relation type list, click the relationship Types list, click the Axial Align button