Step 11

Select the aligning axis on base

In the Assembly window, select the center hole.

Step 12

Finish aligning triangle 

On the Place SmartStep ribbon bar, click OK

Step 13

Mate triangle to base

On the Place Part SmartStep ribbon bar, in the Relationship

Type list, click the Mate button.

Step 14

Use QuickPick to select the planar face on triangle 

 Position the mouse cursor over the the edge of rotor and wait it change to

, and click.

and  the QuickPick tool is displayed. Move the cursor over the different boxes

on QuickPick. Use QuickPick to highlight the planar face on triangle shown in the illustration,

and click to select it.

Step 15

 Select base to mate in the assembly

 In the assembly window, select the base.

 Step 16

Selecting the mating face of base

Use QuickPick to select the left face of base part, as shown in the illustration.

Step 17

Finish the mate command

On the Place Part SmartStep ribbon bar, click OK

Step 18

Place 4 bar 5-3

On the EdgeBar tool, click the Parts Library tab.

In the file list area on the Parts Library tab, select the file named

4 bar 5-3.par, hold down the left mouse button, drag the file into the

assembly window, and then release the mouse button

Step 19

Align 4 bar 5-3 and 4 bar base 

On the Place Part SmartStep ribbon bar, in the relation type list,

click the relationship Types list, click the Axial Align button

Step 20

Select the Axis to Align

In the Place part window, select either hole of 4 bar 5-3.