Step1

Start Solid Edge : Assembly

If Solid Edge is not already running, on the

Start menu, point to Programs, point to Solid Edge,

and then click Solid Edge Assembly.

NOTE: Make sure you open assembly and

No other application from Solid Edge menu if

you want to do motion analysis using Dynamic Designer

Step2

Open a New File and Save

Step 3

Display EdgeBar and arrange the window

If the EdgeBar tool is not displayed, on the Main Toolbar, click

the EdgeBar button 

On the EdgeBar tool, click the parts Library tab

Step 4

Place the Ground Part

Select the part from the Parts Library list in EdgeBar

and then drag into the assembly.

NOTE: If you are not in the directory in which you

extracted the files, Change your current directory

to the directory to which you extracted your files

Step 5

Place the Nozzle Part

In the file list area on the Parts Library tab, select the file named

nozzle.par, hold down the left  mouse button, drag the file into the

assembly window, and then release the mouse button.

Step 6

Align the Ground part and nozzle part

On the Place Part SmartStep ribbon bar, in the relation type list,

click the Relationship Types list, then click on the Axial Align button.

 Step 7

Select the Axis to Align

In the Place part window, select the protrusion on the right.

Step 8

Select the part to which the axis will be aligned

In the assembly window, select the base part.

Step 9

Select the aligining axis on the base part

In the Assembly window, select the top face of the rail.

Step 10

Finishing aligining the nozzle

On the Place SmartStep ribbon bar, click OK