Assembly

Step1

Start Solid Edge : Assembly

If Solid Edge is not already running, on the

Start menu, point to Programs, point to Solid Edge

and then click Solid Edge Assembly.

Step2

Open a New File and Save

Step 3

Display EdgeBar and arrange the Window

If the EdgeBar tool is not displayed, on the Main Toolbar, click

The EdgeBar button 

On the EdgeBar tool, click the parts Library tab

Step 4

Place Geneva base 

Select the Geneva base part from the Parts Library list in EdgeBar

and then drag into the assembly.

Step 5

Display Assembly PathFinder

On the EdgeBar tool, click the Assembly PathFinder tab

Step 6

Hide the reference planes 

Click the right mouse button on the layout to display the shortcut menu.

On the shortcut menu, click the hide command with the left mouse button.

Step 7

Place Geneva driver

On the EdgeBar tool, click the Parts Library tab.

 In the file list area on the Parts Library tab, select the file named

Geneva driver.par, hold down the left mouse button, drag the file into the assembly window, and then release the mouse button.

Step 8

Align Geneva base and Geneva driver

On the Place Part SmartStep ribbon bar, in the relation type list,

click the relationship Types list, click the Axial Align button.

Step 9

Select the Axis to Align

In the Place part window, select the hole in the middle of the driver.

Step 10

Select the part to which the axis will be aligned 

In the assembly window, select the base part.