Step 10
Click on the Insert Action Only Moment button.
Step 11
Click on the link2 part.
Step 12
Click on the link1 part.
Step 13
Select joint location
Click on the hole of link1 or link2 part.
Step 14
Select Force Direction
Click on the hole of link1 and check the force direction.
Step 15
Click on Gravity On and make it off
Step 16
Increase the number of frame
Change Number of frame to 200. Try it with
other numbers and check the results and change the Duration time.
Step 17
Change the torque to 2000 and try it with other values.
Step 18
Play
Click on the Play/Reset button.
Step 19
Right click on the revolute joint which is between link1 and link2 part and
Click on projection angle/about Z axis.
Step 20
Click on Export AVI File button, write file name and
click on OK.
The End
Previous | Next |