Step 15

Apply Torque on the rotor part

Click on the Insert Action Only Moment button.

Step 16

Select Component to which force is applied

Click on the arm part.

Step 17

Select Reference Component to orient Force

Click on the body part.

Step 18

Select joint location

Click on the hole of arm or body pary.

Step 19

Select Force Direction

Click on the hole of arm or body part and check the force direction.

If you need to change direction, refer to tips for "Change force direction"

Step 20

Ignore gravity 

Click on Gravity On and make it off

Step 21

Increase the number of frame 

Change Number of frame to 200. Try it with

other numbers and check the results and change the Duration time.

Step 22

Change the Torque

Change the torque to 600,000 and try it with other values.

Step 23

Play

Click on the Play/Reset button.

Step 24

Plot result with graph

Right click on the revolute joint which is between body and arm part and

Click on projection angle/about Z axis.

Step 25

Make Movie File

Click on Export AVI File button, write file name and

click on OK.

The End