Step 11

Select the aligning axis on base

In the Assembly window, select the center hole.

Step 12

Finish Aligning rotor

On the Place SmartStep ribbon bar, click OK

Step 13

Mate rotor to base

On the Place Part SmartStep ribbon bar, in the Relationship

Type list, click the Mate button.

Step 14

Use QuickPick to select the planar face on rotor

 Position the mouse cursor over the edge of rotor and wait it change to

, and click.

and  the QuickPick tool is displayed. Move the cursor over the different boxes

on QuickPick. Use QuickPick to highlight the planar face on the rotor shown in the illustration,

and click to select it.

Step 15

Select base to mate in the assembly

In the assembly window, select the base.

Step 16

Selecting the mating face of base

Use QuickPick to select the left face of base part, as shown in the illustration.

Step 17

Finish the Mate command

On the Place Part SmartStep ribbon bar, click OK

Step 18

Place 6 bar 400mm

On the EdgeBar tool, click the Parts Library tab.  In the file list area on the Parts Library tab, select the file named 6 bar 400mm.par, hold down the left mouse button, drag the file into the assembly window, and then release the mouse button

Step 19

Align 6 bar 400mm and 6 bar rotor

On the Place Part SmartStep ribbon bar, in the relation type list,

click the relationship Types list, click the Axial Align button

Step 20

Select Axis to Align

In the Place part window, select either hole of 6 bar 400mm.